 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PLL602-00 Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals FEATURES * * * * * * Integrated crystal oscillator circuitry (XO). Low phase noise (-135dBc @ 10kHz offset) selectable frequency multipliers (x1, x2, x4, x8 as bonding options). 3.3V supply voltage. Uses inexpensive fundamental-mode parallel resonant crystals (from 12 to 25MHz). Selectable High Drive (30mA) or Standard Drive (10mA) output. Available in DIE (65 mil x 62 mil). DIE CONFIGURATION 65 mil VDD VDD OE^ S0V S1V S2V (1550,1475) 25 23 21 20 19 18 Die ID: A0303-03H XIN 27 62 mil 13 CLK XOUT 29 DESCRIPTION The PLL602-00 is a monolithic low jitter and low phase noise (-135dBc @10kHz offset), high performance CMOS XO IC. This flexible device can be used as a XO with output frequencies ranging from F XIN x 1 to F XIN x 8 thanks to selector pads allowing bonding options (see Divider Selection Table on this page). This makes the PLL602-00 ideal for a wide range of applications from 12MHz to 200MHz (including 50MHz, 77.76MHz, 125MHz and 155.52MHz, etc.). Y X (0,0) C502A 7 10 GND Note: ^ denotes internal pull up V denotes internal pull down MULTIPLIER SELECTION SELECTION S2 S1 S0 0 0 0 0 0 1 0 1 0 1 0 0 0 1 1 1 1 0 1 0 1 1 1 1 FXIN CLK (MHz) FXIN x 2 FXIN x 4 FXIN x 1 FXIN x 8 FXIN x 2* FXIN x 4* FXIN x 1* FXIN x 8* BLOCK DIAGRAM S[0:2] 12MHz - 25MHz XIn XO XOut Selectable PLL CLK Note: - Selector pads default to `0', wire bond to VDD to set to `1' - (*) High-drive CMOS output PAD DESCRIPTION Name Number Description XIN 27 29 7,10 13 18,19,20 21,22,23 25 Crystal input connection. Crystal connection. Ground. Clock Output. Frequency selection pad 3.3V Power Supply. Output Enable: `0' to disable (tristate output), 1' (default value when not connected) to enabled the output. DIE SPECIFICATIONS Name Value XOUT GND CLK S[0:2] VDD OE Size Reverse side Pad dimensions Thickness 62 x 65 mil GND 80 micron x 80 micron 10 mil 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/03/04 Page 1 GND PLL602-00 Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals ELECTRICAL SPECIFICATIONS 1. Absolute Maximum Ratings PARAMETERS Supply Voltage Input Voltage, dc Output Voltage, dc Storage Temperature Ambient Operating Temperature* Junction Temperature Lead Temperature (soldering, 10s) ESD Protection, Human Body Model SYMBOL VDD VI VO TS TA TJ MIN. -0.5 -0.5 -65 -40 MAX. 4.6 VDD+0.5 VDD+0.5 150 85 125 260 2 UNITS V V V C C C C kV Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. * Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only. 2. DC Electrical Specifications PARAMETERS Supply Current, Dynamic, with Loaded Outputs Operating Voltage Output drive current (High Drive) Output drive current (Standard Drive) Short Circuit Current SYMBOL IDD VDD IOH IOL IOH IOL CONDITIONS FXIN = 12 - 25MHz Output load of 10pF VOH= VDD-0.4V, VDD=3.3V VOL = 0.4V, VDD = 3.3V VOH= VDD-0.4V, VDD=3.3V VOL = 0.4V, VDD = 3.3V MIN. TYP. 16 MAX. 20 3.63 UNITS mA V mA mA mA mA mA 2.97 30 30 10 10 50 3. AC Electrical Specifications PARAMETERS Input Crystal Frequency Output Clock Rise/Fall Time (Standard Drive) Output Clock Rise/Fall Time (High Drive) Output Clock Duty Cycle SYMBOL CONDITIONS 0.3V ~ 3.0V with 15 pF load 0.3V ~ 3.0V with 15 pF load Measured @ 50% VDD MIN. 12 TYP. 2.4 1.2 MAX. 25 UNITS MHz ns 45 50 55 % 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/03/04 Page 2 PLL602-00 Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals 4. Crystal Specifications PARAMETERS Crystal Resonator Frequency Crystal Loading Rating Recommended ESR SYMBOL FXIN CL (xtal) RE CONDITIONS Parallel Fundamental Mode AT cut MIN. 12 20 30 TYP. MAX. 25 UNITS MHz pF 5. Jitter and Phase Noise Specification PARAMETERS CONDITIONS at 155MHz, with capacitive decoupling between VDD and GND. RMS Period Jitter (1 sigma - 1000 samples) at 80MHz, with capacitive decoupling between VDD and GND. at 44MHz, with capacitive decoupling between VDD and GND. Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier 44MHz @100Hz offset 44MHz @1kHz offset 44MHz @10kHz offset 44MHz @100kHz offset 44MHz @1MHz offset 155MHz @100Hz offset 155MHz @1kHz offset 155MHz @10kHz offset 155MHz @100kHz offset 155MHz @1MHz offset MIN. TYP. 4 3 2.5 -80 -110 -135 -130 -132 -80 -110 -125 -120 -125 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps MAX. UNITS 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/03/04 Page 3 PLL602-00 Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals PAD ASSIGNMENT Pad # 7 10 13 18 19 20 21 23 25 27 29 Name GND GND CLK S2 S1 S0 VDD VDD OE XIN XOUT X (m) 1042 1400 1400 1232 1042 854 659 459 194 109 109 Y (m) 109 259 716 1365 1365 1365 1365 1365 1365 1017 646 Ground. Ground. CMOS clock output. Used to select multiplication factor and drive level. Internal pull down. Used to select multiplication factor and drive level. Internal pull down. Used to select multiplication factor and drive level. Internal pull down. 3.3V power supply. 3.3V power supply. Used to enable/disable the output(s). Internal pull up. Crystal input. See crystal specification page 3. Crystal output. See crystal specification page 3. Description ORDERING INFORMATION For part ordering, please contact our Sales Department: 47745 Fremont Blvd., Fremont, CA 94538, USA Tel: (510) 492-0990 Fax: (510) 492-0991 PART NUMBER The order number for this device is a combination of the following: Device number, Package type and Operating temperature range PLL602-00 D C PART NUMBER TEMPERATURE C=COMMERCIAL I=INDUSTRAL PACKAGE TYPE D=DIE Order Number PLL602-00DC Marking P602-00DC Package Option Die - Waffle Pack PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product. LIFE SUPPORT POLICY: PhaseLink's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of PhaseLink Corporation. 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/03/04 Page 4 |
Price & Availability of P602-00DC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |